User Contributed                                           MET/CAL PROCEDURE
=============================================================================
INSTRUMENT:            8522A MIL-STD-45662A Before Data 1 Year Spec
DATE:                  14-Mar-91
AUTHOR:                User Contributed
REVISION:              2.0
ADJUSTMENT THRESHOLD:  70%
NUMBER OF TESTS:       3
NUMBER OF LINES:       45
=============================================================================
 STEP    FSC    RANGE NOMINAL        TOLERANCE     MOD1        MOD2  3  4 CON
  1.001  ASK-                        P                            F        W
  1.002  ASK+           B
#Source: Calibrtion Manual Dated: 11/81 Section 5
#The 24 Hour Spec of the 5700A is used in the TUR computationsf
  1.003  HEAD         EQUIPMENT SETUP
  1.004  DISP         HIGH VOLTAGE is used or exposed during the performance
  1.004  DISP         of this calibration. DEATH ON CONTACT may result if
  1.004  DISP         personnel fail to observe safety precautions.
  1.005  DISP         Connect the UUT to an AC power source.
  1.005  DISP         Turn UUT on.
  1.005  DISP         Warm-up time: 1 Hour
  1.005  DISP         Ambient temperture: 22C - 24C
  1.005  DISP
  1.005  DISP         Connect the UUT to the UUT IEEE-488 bus.
  1.006  DISP         Connect the 8522A input high to the 5700A output high
  1.006  DISP         Connect the 8522A input low to the 5700A output low
  1.006  DISP         Connect the 8522A Source high to the 5700A sense high
  1.006  DISP         Connect the 8522A Source low to the 5700A sense low
  1.006  DISP         Connect the 8522A guard to the 5700A guard
  1.007  DISP         DEPRESS THE 8522A EXTERNAL GUARD BUTTON
  1.007  DISP         RELEASE THE FRONT/REAR BUTTON ON THE 8522A
  1.008  CALL         8522A MIL-STD-45662A 1 Year Spec
  1.009  JMP          2.001
  1.010  EVAL
  2.001  CALL         8522A RESISTANCE 1 Year Spec
  2.002  JMP          3.001
  2.003  EVAL
  3.001  CALL         8522A AC VOLTS 1 Year Spec
  3.002  END
#! T.U.R.s less than 4.00:                  0
#! T.U.R.s estimated using RANGE value:     0
#! T.U.R.s not calculated (ASK- U):         0
#! T.U.R.s not computable at compile time:  0
#! FOR JUSTIFICATION REFER TO COMMENTS FOLLOWING EACH TEST IN THIS LISTING.